How to repair high fuel consumption in cars

 Today's car is almost 10 miles of fuel, is your car also very fuel intensive? First get in the car, start the car, look at this idle speed, 1000 rpm.

A normal car should idle at 700 to 800 rpm, can this not be fuel efficient. If the idle speed is higher like this, there is usually a problem with the throttle, and this is the throttle that

The minimum amount of money needed to wash the throttle is 300 yuan, but today we are going to wash the throttle ourselves. First of all, the air filter is removed, there are no screws on it, and no tools are needed, it will fall off when you break it up by hand.

After breaking them off, set them aside for now.

First, wipe it with a paper towel and see how much carbon has accumulated.

Here we will clean it. Before we clean it, we find a brick, first open the key door and press it against the gas pedal with

This opens the throttle.

Take some paper towels and spray this cleaner on top of the paper towels.

Then tuck in the throttle and

Wiping back and forth, looking so dirty.

It's all carbon. If there is too much carbon, it will jam this skid plate and cause it not to seat, so it will cause high idle speed, and high idle speed will definitely lead to high fuel consumption. Now that you've cleaned it, take the brick off the accelerator and put the air filter back on, the installation is particularly easy, just press down gently with your hand.

Start the vehicle for a test drive, it now only idles at 750 rpm.

The problem has been completely solved and the fuel consumption can definitely be reduced. Isn't car repair particularly easy? Learn a little bit about car repairs every day and repair your car yourself!